Howdy, Stranger!

It looks like you're new here. If you want to get involved, click one of these buttons!

Advice on Tanks and Equipment

livefishlivefish Administrator Posts: 278
edited July 2008 in Beginner's Forum
Where To Get Your Equipment
All fish stores sell tank setups containing “everything you need” for one price. However, a smart shopper looks carefully at what the package contains to be sure it includes only what you need (and doesn't include things you don't). Packages vary from store to store, some are more appropriate than others. Be especially wary of setups bought at discount stores. They often include obsolete technology, noisy pumps, cheap heaters, etc.

Garage sales are a great way to get into the hobby cheaply. However, a few cautions are in order. Before buying the tank, examine it closely for cracks or scratches. Although cracks can be fixed, doing so is more hassle (for a beginner) than it is worth. Don't buy a scratched tank; algae will grow in the scratches making the tank look bad. Be wary of really old equipment. It may no longer work well.

Before setting up the tank (especially if the tank is used), check it for leaks. Fill it with water outside and leave it for a week. A leak on your carport is a lot less of a problem than one in your living room.

To clean the tank, NEVER use soaps or detergents. Use water and nothing else. If you want to sterilize the tank, gravel, etc. wash everything plastic in a mild bleach solution (use pure bleach, not one with other additives). Rinse everything well in clean water, and let everything soak a bit in a solution with a bit of added dechlorinator. (Non-plastic) gravel can be sterilized through boiling.

Equipment: What's Essential and What's Not
Tons of aquarium gadgets are available at pet stores. Some are essential, others are useful only for specialized applications, and some are completely useless (though stores selling them probably won't tell you that). The following checklist shows the items that will likely to be of use to you.

Tanks
Tanks come in many shapes and sizes, but there are only two types: glass and acrylic. You will probably want to get a glass tank. In summary:

Glass
=====
-cheapest per gallon
-hard to scratch
-scratches permanent
-higher index of refraction
-empty tank heavy
-Tank stand only needs to support edges
-more easily broken

Acrylic
=====
-more expensive per gallon
-scratches easily (e.g. scraping algae with razor blade)
-scratches can be buffed out (though not easily)
-lower IOR (tank distorts less when viewed from angle)
-same sized tank weighs less (empty) (important with tanks >30g)
-Special stand needed that supports entire base of tank (not just edges)
-harder to break



The size and shape of the tank is completely up to you. However, keep the following in mind:

1. Contrary to first impressions, larger tanks are not necessarily more work than smaller ones (within reason). In particular, it is easier to keep water chemistry stable in larger tanks than in smaller ones (the less water, the more easily a small chemical change causes a big change in relative concentration).

Much of the regular maintenance work does not require twice the time for twice the size. For example, a regular partial water change for a larger tank may require one more bucket of water than for a small tank. That doesn't translate into twice the work, since you already have the bucket and siphon ready, your hands are already wet, etc.

2. It is very common for people to really like their fish tank and want to add more fish. A larger tank can hold more fish safely. Indeed, a single 10g tank adequately supports only a handful of medium sized fish.

3. Note, however, that the number of fish that a tank can safely hold depends not only on the volume of the tank, but on its shape. For example, some fish spend their entire lives near the bottom. Doubling the volume of a tank by doubling its height won't allow you to keep more bottom dwelling fish. Surface area is more important than volume in determining how many fish a tank can support.

If possible, start with at 20g (or larger) rather than a 10g (or smaller). A 20g (“high” or “tall”) makes an excellent first tank size. Avoid all tanks smaller than 10g. They are simply too small to keep healthy. For example, although many stores sell them, the tiny 1 gallon goldfish bowls are totally inadequate for even a single fish. Stay away from them!

Heaters
If you are keeping tropical fish, you will need a heater. A heater insures that a tank doesn't get too cool, and that the temperature stays steady during the course of the day, even when the room cools off (e.g., at night). For many tropical fish, a temperature of 78F is ideal.

There are two main heater types. Submersible heaters stay completely below the water. A second, more traditional style, has a partially submerged glass tube (which contains the heating coils), but leaves the controls above the water. Submersible heaters are the better design, as they can be placed horizontally along the tank's bottom. This helps keep tank temperature uniform (heat rises), and prevents the heater from becoming exposed while doing partial water changes. With the traditional design, one must remember to unplug the heater before doing water changes; if the heater is accidentally left on while the coil is above the water, the tube gets hot and may crack when you fill the tank back up with water.

If your room is never more than 8-10F degrees cooler than your target tank temperature, a heater of roughly 2.5 Watts per gallon will suffice. If the differential is higher, up to 5 Watts (or more) per gallon may be necessary. Remember, the heater needs to keep the tank at its target temperature, even when the room is at its coldest point; the tank's temperature should not fluctuate.

Heaters (especially cheap ones) will fail. Most often the contact that actually turns the heater on and off gets permanently stuck, either in the on or off position. In the former case, your tank can get VERY hot, especially if the heater is larger than your tank actually requires. To minimize potential problems, avoid heaters larger than the optimal size for your tank. To prevent winter disasters, use two smaller heaters in parallel rather than one large one. That way if one fails, the consequences won't be as disastrous.

Thermometers
You will need a thermometer to verify that your tank stays at its proper temperature. Two types are commonly available. The traditional bulb thermometer works the same way as the ones you can buy for your house. They either hang from the top edge of your tank, or float along the surface. The second common design is a flat model that sticks to the outside of the glass. In this design, liquid crystals activate at a specific temperature, either highlighting the numerical temperature or a bar that slides along a scale.

Aquarium thermometers can be rather unreliable (check out the ones on display at a fish store --- they should all register the same temperature, but frequently don't). Thus, thermometers are good for verifying that your temperature is not too far off, but may be off by several degrees in some cases. When buying a thermometer, look at all the thermometers and pick one that has an “average” temperature, rather than one of the extremes.

Filters
There are three types of filtration: biological, mechanical and chemical. Biological filtration decomposes the toxic ammonia that fish produce as waste products. All fish tanks MUST have biological filtration; biological filtration is the cheapest, most efficient and most stable way to breakdown toxic ammonia. Mechanical filtration traps such particles as plant leaves, uneaten food, etc. (collectively known as mulm), allowing them to be removed from the tank before they decompose into ammonia. Chemical filtration (e.g., activated carbon, zeolite, etc.) can remove (under limited circumstances) such substances as ammonia, heavy metals, dissolved organics, etc. through chemistry (e.g., “adsorbtion” or “ion-exchange resins”). Chemical filtration is mostly useful for dealing with short-term problems, such as removing medications after they've served their purpose, or purifying tap water before it goes into a tank. A healthy tank DOES NOT require the use of chemical filters such as activated carbon.

One point about filtration cannot be made enough. ALL FISH TANKS MUST HAVE BIOLOGICAL FILTRATION. Although chemical filtration can remove ammonia under limited circumstances, it are NOT a general solution.

Typical filters perform some or all of the three filtration types in series. Mechanical filtration (if present) usually comes first (where it is called a “pre-filter”), trapping particles that might clog remaining stages. Biological usually comes next, followed by the chemical filtration section (if present). Whether or not chemical filtration is useful (or even helpful) depends on who you talk to. It can be useful for removing fish medicines after their effectiveness has ended (partial water changes do the same thing though). They can also remove trace elements necessary for plant growth (with obvious results). Unless you have a good reason to believe that your circumstances require chemical filtration, avoid it.

Filters are not maintenance-free. For example, if debris is allowed to accumulate in a mechanical filter, it decomposes into ammonia, negating its primary purpose. Likewise, a biological filter's effectiveness diminishes as it becomes clogged. Biological filtration requires water movement across a large surface area on which bacteria have attached (e.g., floss or gravel). The less surface area available, the less effective the filter. UGFs are cleaned by regularly vacuuming the gravel (e.g. while doing partial water changes). Canister and power filters are cleaned by removing the media and gently squeezing it in a bucket of used tank water (tap water may contain bacteria-killing chlorine).

There is no magic formula for what size filter one needs. Consult with specific manufacturer's ratings and be conservative. You can't have too much filtering (though you can have too much water movement), so err on the side of overfiltering.

Gravel
Gravel serves three main purposes. First, it serves as decoration, making your tank look nicer. Second, if using an UGF, gravel is mandatory as it is the filter media (the surface area on which bacteria attach). Third, in plant tanks, it serves as a “substrate” (e.g. dirt) for plant roots. Ultimately, the choice of color, size, etc. is up to you. However, be aware that dark gravel better highlights a fish's colors. Fish adjust their colors to match that of the surroundings, and light gravel tends to wash out a fish's true colors.

Most of the gravel sold for aquariums is plastic coated. For obvious reasons, you should not boil it. <!-- s:-) --><img src="{SMILIES_PATH}/icon_smile.gif" alt=":-)" title="Smile" /><!-- s:-) --> It is also very expensive ($1 a pound). Gravel can be purchased for much less at patio stores (e.g., Wallmart, Home Quarters, local sand and gravel suppliers, etc.). However, it often tends to be larger than ideal and too light in color (e.g., marble chips). Sand can also be used.

Be aware that not all gravel is inert. For example, coral, sea shells, dolomite and limestone will release (leach) carbonates into the tank raising its pH buffering capacity. When keeping African rift lake cichlids, this is desirable. But in most other cases, you will not want your gravel affecting the water chemistry. As a quick test, drip an acid (e.g., vinegar) onto the gravel in question. If it foams or bubbles, the gravel is going to leach carbonates into the water. To be absolutely sure, fill a bucket of gravel with water and measure the pH over a period of a week. If the pH remains stable, it should be safe to use in your tank.

When used for the first time, gravel should be washed thoroughly. Simply rinse clean water through it until the water comes out clear (tap water is fine). For example, put the gravel in a bucket of water, fill it with water, and churn the gravel up. Drain the water and repeat the procedure until the water remains clear. Before using gravel of unknown origin (e.g., not purchased at a fish store), you may (as a precaution) want to boil it for 15 minutes to kill unwanted bacteria.

Driftwood and other Decorations
It is safe to place items in your tank as long as they are inert, meaning they won't release (leach) chemicals into the water. Most plastics are inert inert, as are glass and ceramic.
Wood may leach substances into the water, changing the pH in a possibly inappropriate manner. Driftwood often leaches tannins and other humic acids into the water (much like peat moss), possibly softening it and lowering its pH. The water may also obtain a yellowish tea-colored tint. The tint is not harmful and can be removed by filtering the water through activated charcoal.

If you use wood that you've found yourself (e.g., woods or lake), boil it first to kill any pathogens. Boiling it (long enough) will also make it sink.

Lights & Hood
You will probably want to purchase lights and a hood. A hood prevents fish from jumping out of the tank and reduces the rate at which water evaporates. A good hood effectively seals the tank (except perhaps where the heater and filter reside). You want as little water as possible evaporating as it may raise the room's humidity to unacceptable levels and requires more maintenance (i.e., you will have to “top off” the tank once or twice a week to replace the lost water).

There are two styles of hoods. Full hoods combine the light and hood as a single unit. Hoods include space for only 1 or 2 (parallel) fluorescent light tubes, which is fine for fish-only tanks, but not usually enough for growing plants. Glass “canopies” cover the tank with two strips of glass connected by a plastic hinge, but don't include lighting. A separate strip (or other) light is used in conjunction with it. Canopies are a bit better for plant tanks than full hoods; one can upgrade or change the lighting without replacing the entire hood, and in situations where very high wattage is needed, one can usually fit more light bulbs directly above the tank.

Light serves two purposes. It highlights and shows off your fish's colors and provides (critical) energy for plants (if present). Unfortunately, the two purposes conflict somewhat. In a fish-only tank, a single low-wattage fluorescent bulb suffices and does a good job of showing a fish's true colors (most fish don't like bright lights either). If you want to grow plants, however, more light is needed, and the bulb's spectrum becomes an issue.

Whether or not you will be growing plants, fluorescent lights are the way to go. Incandescent bulbs give off too much heat, causing your tank to overheat in the summer. Fluorescent bulbs run cooler and use less electricity for the same amount of light. Note that in the summer time, even fluorescent lighting can produce enough heat to lead to tank overheating problems, if your house gets warm (e.g, you live in the tropics and don't have air conditioning).

Unfortunately, light grows not only plants, but algae. If your tank contains lots of the kind of light plants desire, and there are no plants, algae quickly fills the void. Thus, the ideal lighting for fish-only tanks differs significantly from that for a plant tank. Two components of light are of particular importance: intensity (i.e., wattage) and spectrum. Plants require intense light and certain spectral ranges produce more growth than others.

Different types of bulbs give off light in different spectral regions. So-called “full-spectrum” bulbs attempt to reproduce the sun's full spectral range. They are good both for growing plants and bringing out a fish's natural colors. Specialized “plant” bulbs (e.g., gro-lux, etc.) emphasize a spectral range that stimulates plant growth. Such bulbs grow plants (and algae!) well, but fish don't look quite right under them, because the light does not have the spectrum of normal sunlight. The common “cool white” bulbs give off light designed for humans in windowless offices; they neither grow plants particularly well, nor bring out a fish's natural colors. As a quick rule of thumb, 2-4 watts/gallon of full-spectrum (or specialized “plant”) lighting is good for plants; for fish-only tanks, use less than 1 watt/gallon, and avoid using plant bulbs.

Powerheads
A powerhead is a water pump that runs completely submerged in a tank. They typically attach to the “lift tubes” associated with UGF filters, pulling water through the lift tube. The stream of outgoing water can usually be oriented in (almost) any direction, and it is common to point them in such a way that water circulates throughout the tank and stirs up or “agitates” the surface a bit.

Air Pumps
An air pump simply bubbles air through your tank. Air pumps serve two purposes. First, they insure that your tank maintains an adequate concentration of oxygen. An air pump is NOT required for this purpose, as long as your tank maintains adequate water movement together with surface agitation. This is generally the case if external (e.g., box or cannister) filters are used. Second, air pumps can be used to force water through a filter (e.g., sponge or corner filter). If using a UGF, for example, an air pump produces bubbles that force water up the uplift tubes, pulling water through the filter. In larger tanks, powerheads perform the same function. Thus, an air pump is not required, provided your tank has good water circulation.

Stands
You will need some sort of stand on which to place your tank. The stand can either be specially designed to hold your tank, or existing furniture. The first thing to consider is whether your chosen stand can support the tank's weight. When full of water, tanks weigh a LOT (the water alone weighs roughly 10 lbs/gallon).

If you live in an older or cheaply constructed home, give consideration to how weight is distributed among the stand's supports. The larger the surface area of the leg stands, the less instantaneous pressure (per square inch) on the floor. You don't want the stand to crash through your floor! If you plan to have a large tank (e.g., 55g or more), be sure the floor itself can properly support the weight. For big tanks, try to place the tank perpendicular to the floor joists (so that the weight is distributed over multiple joists). Placing your tank near a load bearing wall is also safer than placing in the middle of your floor.

Stands should keep the tank level, in order to keep weight distributed properly. An un-level tank places stress in the wrong places, increasing the odds of having the tank break (yes, this does actually happen sometimes). In order to more evenly distribute weight on the stand, it is a good idea to place a 1/4 inch sheet of Styrofoam between the stand and the tank.

Plants
There are two kinds of plants (depending on who you talk to): real and plastic. Both kinds provide decoration and hiding places for fish. Plastic plants are (obviously) easier to maintain. Although it is possible to grow real plants in an aquarium, it is not always trivial to do so (e.g., plants have special lighting requirements).

Miscellaneous Cleaning Tools
Siphoning is the easiest way to remove water from a tank. For large tanks, using a “water python” or other long hose allows one to dispense with the bucket and siphon water directly into a drain or outside garden. When removing water via siphoning, you should also clean (“vacuum”) your gravel. Many “water changing” hoses are available at local fish stores and include a gravel cleaning attachment. The basic idea behind them is to connect a wide mouthed tube to the end of the siphon hose. When the tube is plunged into the gravel, the water flow churns up the gravel, but only the detritus (dirt, mulm, etc) is light enough to be siphoned out. Note that the dirty water being removed from your tank contains nitrates, which make an excellent fertilizer for your flower or vegetable garden.

To remove algae from the side of your tank, a plastic, non-soapy scouring pad can be used. If you have an acrylic tank, be especially careful that the pad isn't hard enough to scratch the side. Many types of algae can be wiped free using the floss inserts made for Whisper filters (cheap and can't scratch).

Some of the slower growing algae simply can't be removed with a scouring pad without a lot of work (and churning of the tank!). A razor blade works best at this point. Go to your local fish store and purchase a scraper that has a long (foot long) handle with a razor blade on one end. A razor blade can be used to remove just about anything from the sides of a tank. However, razor blades CAN scratch glass, if one is not careful.

So-called “magnet cleaners” can also be helpful for removing algae. A scraping block on the inside of the tank is held in place by a magnet held on the outside of the tank. Moving the outside magnet moves the scraping block, removing algae without having to plunge your entire arm in the tank. The best magnet cleaners are those with a strong magnetic field (e.g., larger magnets), and they work best on smaller tanks, which have thinner glass.

A toothbrush is one of the most effective tools for removing algae from the inside of plastic tubing.

Bucket For Water Changes
You will need at least one bucket for adding and removing water from your tank. Use the largest bucket you can comfortably work with (e.g., up to 5 gallons). Use it only for your aquarium and don't ever put any chemicals in it.

Nets
You will need at least one fish net, and having two is better; catching fish is easier if you use one net to chase fish into the other. Nets with a fine mesh are harder to use because of their high water resistance. The right net size will of course depend on the size of your fish.

Note: netting fish is stressful. In particular, the fish net scrapes off some of a fish's protective slime coating. If possible, when catching fish, use a net to chase the fish into a small plastic or glass jar.

Copyright
These FAQs owe their existence to the contributors of the net, and as such it belongs to the readers of rec.aquaria and alt.aquaria. Articles with attributions are copyrighted by their original authors. Copies of the FAQs can be made freely, as long as it is distributed at no charge, and the disclaimers and the copyright notice are included.

Comments

  • NicholasCNicholasC Member Posts: 355
    Acrylic
    =====
    -more expensive per gallon
    -scratches easily (e.g. scraping algae with razor blade)
    -scratches can be buffed out (though not easily)
    -lower IOR (tank distorts less when viewed from angle)
    -same sized tank weighs less (empty) (important with tanks >30g)
    -Special stand needed that supports entire base of tank (not just edges)
    -harder to break

    Also with my tank (acrylic) once that water is in DO NOT attempt to nudge or slide it as it will warp and eventually split or crack, Also simple things like cleaning with a magnetic cleaner can scratch if you have gravel in between <!-- s:cry: --><img src="{SMILIES_PATH}/icon_cry.gif" alt=":cry:" title="Crying or Very sad" /><!-- s:cry: --> so make sure you check it for that <!-- s:D --><img src="{SMILIES_PATH}/icon_biggrin.gif" alt=":D" title="Very Happy" /><!-- s:D -->

    Although handy light weight and cheap... i still prefer glass as it is more sturdy and reliable but then again you can make your own acrylic tanks <!-- s:wink: --><img src="{SMILIES_PATH}/icon_wink.gif" alt=":wink:" title="Wink" /><!-- s:wink: -->

    Regards

    Nic
  • thingthingthingthing Member Posts: 100
    for those not familiar with gallons 1 us gallon equals 3.785 litres
  • JamessJamess Member Posts: 235
    Regarding lighting, if I buy a flourescent light ballast from my local hardware store, and say it comes with 2x 40 watt tubes, can I replace them with any sort of aquarium-suitable tubes? I don't know much about this area. Also, do most people recommend getting lighting from their lfs, or can you find what you need in a hardware store, for less $$ <!-- s:P --><img src="{SMILIES_PATH}/icon_razz.gif" alt=":P" title="Razz" /><!-- s:P -->

    P.S. I had a quick scout at my hardware store and could only see 6500k bulbs, max, the rest were "warm white" or something at only ~3500k.
  • Daniel AlexiucDaniel Alexiuc Administrator Posts: 47
    Hardware store fluoro fittings are ok - but they're not designed for aquariums (read waterproof) so will probably rust before too long.

    Bunnings has aquarium fluoro tubes for about $20 too.
  • sthn75sthn75 Moderator Posts: 3,487
    Hey Congrats on your first post on the forum ITGuy <!-- s:lol: --><img src="{SMILIES_PATH}/icon_lol.gif" alt=":lol:" title="Laughing" /><!-- s:lol: --> <!-- s:lol: --><img src="{SMILIES_PATH}/icon_lol.gif" alt=":lol:" title="Laughing" /><!-- s:lol: -->
Sign In or Register to comment.